|
|
Starting command:[/root/soft/SF_Genesis-v1.7.0.01020130612-fc14-32bit/SF_Genesis -PROCESS_SSD 1:0:0:0 "/root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/FW_PPRO_5_2_2_Release.672199.release.0.mfp" "/root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/27187.0.driveconfig" 1 1 LOG="/root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/1_localhost.localdomain_DATETIMESTAMP_1.0.0.0_PROCESS_SSD_RESULT.log" ]...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit
SF_Core Library: v1.7.1.20130612-fc14-32bit
Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Mon 11/02/2015 06:16:56] - SF_Genesis has been invoked with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
argv[1]: -PROCESS_SSD
argv[2]: 1:0:0:0
argv[3]: /root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/FW_PPRO_5_2_2_Release.672199.release.0.mfp
argv[4]: /root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/27187.0.driveconfig
argv[5]: 1
argv[6]: 1
argv[7]: LOG=/root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/1_localhost.localdomain_DATETIMESTAMP_1.0.0.0_PROCESS_SSD_RESULT.log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Mon 11/02/2015 06:16:56] - Instructing the operating system to purge any existing cached data for device: '1:0:0:0'
[Mon 11/02/2015 06:17:01] - Issuing a discovery command for device: '1:0:0:0'
[Mon 11/02/2015 06:17:06] - Discovery command completed...
[Mon 11/02/2015 06:17:06] - Waiting 5 seconds for the system to settle...
[Mon 11/02/2015 06:17:11] - Device designation string '1:0:0:0' is mapped to node '/dev/sg0'
[Mon 11/02/2015 06:17:11] - Proceeding to process SSD device with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DeviceName = /dev/sg0
MFP Package Filename = /root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/FW_PPRO_5_2_2_Release.672199.release.0.mfp
Configuration File = /root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/27187.0.driveconfig
Serial No. = 1
World Wide Name = 1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Mon 11/02/2015 06:17:11] - Successfully received the IDENTIFY data from the drive...
[Mon 11/02/2015 06:17:11] - Validating Manufacturing Firmware Package: /root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/FW_PPRO_5_2_2_Release.672199.release.0.mfp
[Mon 11/02/2015 06:17:19] - Successfully opened the package: /root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/FW_PPRO_5_2_2_Release.672199.release.0.mfp
[Mon 11/02/2015 06:17:19] - file /root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/27187.0.driveconfig Loaded successfully
[Mon 11/02/2015 06:17:19] - Warning: Unable to query diagnostics information to perform power management settings check
[Mon 11/02/2015 06:17:19] - B01 Power Management configuration request detected
[Mon 11/02/2015 06:17:19] - Successfully extracted *.DriveConfig file: /root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/27187.0.driveconfig
[Mon 11/02/2015 06:17:19] - Extracted Config_ID: 1 (27187) in DriveConfig file: /root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/27187.0.driveconfig
[Mon 11/02/2015 06:17:19] - Extracted SerialOutputControl: 0
[Mon 11/02/2015 06:17:19] - Searching for flashware image for configuration 27187
[Mon 11/02/2015 06:17:19] - Manifest found for configuration 27187
[Mon 11/02/2015 06:17:19] - Flashware image extracted: 27187_fw_cl_mlc_Micron_64Gb_MT29F128G08CFAAAWP_2Q_2C_1D_S_PP_R00714_s512.vic
[Mon 11/02/2015 06:17:19] - Searching for manufacturing image for configuration 27187
[Mon 11/02/2015 06:17:19] - Manifest found for configuration 27187
[Mon 11/02/2015 06:17:19] - Manufacturing image extracted: 27187_mf_mlc_Micron_64Gb_MT29F128G08CFAAAWP_2Q_2C_1D_S_PP_R00714_s512.vic
[Mon 11/02/2015 06:17:19] - Proceeding in ROM mode, download feature 3...
[Mon 11/02/2015 06:18:26] - FATAL_ERROR: Could not download MFB to the drive...(0x11000001:SF_SG_DEVICE_CHECK_CONDITION_ERROR)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Extended Error data:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ATA COMMAND : 0x0092 (146)
ATA FEATURE : 0x0003 (3)
Device Status: 0x0001 (1)
Driver Status: 0x0000 (0)
Host Status: 0x0008 (8)
~~~~~~~~~~~~~~
Sense Data:
~~~~~~~~~~~~~~
0 - No Sense: 114 (0x72) OK
1 - Recovered Error: 11 (0x0B) FAIL
2 - Not Ready: 0 (0x00) OK
3 - Medium Error: 0 (0x00) OK
4 - Hardware Error: 0 (0x00) OK
5 - Illegal Request: 0 (0x00) OK
6 - Unit Attention: 0 (0x00) OK
7 - Data Protect: 14 (0x0E) OK
8 - Blank Check: 9 (0x09) OK
9 - Vendor Specific: 12 (0x0C) OK
10 - Copy Aborted: 0 (0x00) OK
11 - Aborted Command: 0 (0x00) OK
12 - Equal Comparison: 0 (0x00) NA
13 - Volume Overflow: 0 (0x00) NA
14 - Miscompare: 0 (0x00) OK
15 - Reserved: 128 (0x80) NA
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
System Trace:
~~~~~~~~~~~~~~~~
[ 127.802570] sd 1:0:0:0: [sda] START_STOP FAILED
[ 127.802572] sd 1:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 127.802576] sd 1:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[ 127.802580] sd 1:0:0:0: [sda] Add. Sense: No additional sense information
[ 127.802648] ata2.00: disabled
[ 132.805222] ata2.00: hard resetting link
[ 133.109014] ata2.01: hard resetting link
[ 133.565068] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 133.565078] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 133.565302] ata2.00: ATA-8: SandForce{200026BB}, 20DABBR0, max UDMA/133
[ 133.565305] ata2.00: 64 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 133.568233] ata2.00: configured for UDMA/133
[ 133.568240] ata2: EH complete
[ 133.568336] scsi 1:0:0:0: Direct-Access ATA SandForce{200026 20DA PQ: 0 ANSI: 5
[ 133.570268] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 133.571332] sd 1:0:0:0: [sda] 64 512-byte logical blocks: (32.7 kB/32.0 KiB)
[ 133.571335] sd 1:0:0:0: [sda] 4096-byte physical blocks
[ 133.571387] sd 1:0:0:0: [sda] Write Protect is off
[ 133.571390] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 133.571413] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 133.572082] sda: unknown partition table
[ 133.575211] sd 1:0:0:0: [sda] Attached SCSI disk
[ 157.704040] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 157.704045] ata2.00: failed command: DOWNLOAD MICROCODE
[ 157.704050] ata2.00: cmd 92/03:21:00:00:02/00:00:00:00:00/00 tag 0 pio 16896 out
[ 157.704051] res 40/00:00:80:00:00/00:00:00:00:00/e0 Emask 0x4 (timeout)
[ 157.704054] ata2.00: status: { DRDY }
[ 157.704062] ata2.00: hard resetting link
[ 158.009014] ata2.01: hard resetting link
[ 163.514019] ata2.00: link is slow to respond, please be patient (ready=0)
[ 167.747012] ata2.00: SRST failed (errno=-16)
[ 167.747019] ata2.00: hard resetting link
[ 168.052012] ata2.01: hard resetting link
[ 173.557044] ata2.00: link is slow to respond, please be patient (ready=0)
[ 177.790021] ata2.00: SRST failed (errno=-16)
[ 177.790028] ata2.00: hard resetting link
[ 178.095015] ata2.01: hard resetting link
[ 183.600016] ata2.00: link is slow to respond, please be patient (ready=0)
[ 212.824019] ata2.00: SRST failed (errno=-16)
[ 212.824026] ata2.00: limiting SATA link speed to 1.5 Gbps
[ 212.824029] ata2.01: limiting SATA link speed to 1.5 Gbps
[ 212.824034] ata2.00: hard resetting link
[ 213.129017] ata2.01: hard resetting link
[ 217.869014] ata2.00: SRST failed (errno=-16)
[ 217.869017] ata2.00: reset failed, giving up
[ 217.869020] ata2.00: disabled
[ 217.869033] ata2: EH complete
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Mon 11/02/2015 06:18:26] - End of Genesis manufacturing log.
[Mon 11/02/2015 06:18:26] - Exiting...
[Mon 11/02/2015 06:18:26] - Overall Result for Device: /dev/sg0 ****** FAIL ******
Process exited with code 20 错误代码请帮忙分析
|
|
发表于 2016-3-29 00:51:46
收藏
转播
分享
淘帖
支持
反对
