|
|
此Merged版固件已將過往分開的非CacheCade版和可支持CacheCade Pro 2.0的二個獨立版本合併到現時的統一版本，即已不用再按功能來區分LSI 9260/9280的固件。
This Firmware Support for CacheCade Pro 2.0 and non-CacheCade enabled controllers
~~~ !!! 注意 !!! ~~~ !!! 注意 !!! ~~~
本版為Merged版本，在升級Firmware後的第一次開機RAID卡需要約2分鐘時間進行更新程序，期間會停留在RAID卡的啟動畫面，此時千萬不能關機
~~~ !!! 注意 !!! ~~~ !!! 注意 !!! ~~~
************************************
LSI Corp. MegaRAID Firmware Release
************************************
Release date: 05/21/12
======================
Supported Controllers:
======================
MegaRAID SAS 9260-4i
MegaRAID SAS 9260CV-4i
MegaRAID SAS 9260-8i
MegaRAID SAS 9260CV-8i
MegaRAID SAS 9260DE-8i
MegaRAID SAS 9261-8i
MegaRAID SAS 9280-4i4e
MegaRAID SAS 9280-8e
MegaRAID SAS 9280DE-8e
MegaRAID SAS 9280-24i4e
MegaRAID SAS 9280-16i4e
MegaRAID SAS 9260-16i
******* This firmware supports Cachecade Pro 2.0 (if activated) for the controllers mentioned above.
******* This single firmware image can be used on all of the controllers mentioned above (no longer need separate image for the high-port-count controllers) .
Component:
=========
SAS MegaRAID Firmware Release for MegaRAID Controllers
Release date: 05/21/2012
Version Numbers:
===============
Current Firmware Package (with CacheCade Pro 2.0): 12.12.0-0102 (Merged)
Current Package Details:
APP-2.130.293-1580_BB-2.02.00.00-0000_BIOS-3.24.00_4.12.05.00_0x05160000_HII-_WEBBIOS-6.0-48-e_44-Rel_PCLI-04.04-01900008_BOOT-09.250.01.219_NVDATA-2.09.03-0031_2012_03_22
Previous Firmware Package (with CacheCade Pro 2.0): 12.12.0-0091
Previous Package Details:
APP-2.130.243-1483_BB-2.02.00.00-0000_BIOS-3.24.00_4.12.05.00_0x05120000_WEBBIOS-6.0-42-e_37-Rel_PCLI-04.04-01900008_BOOT-09.250.01.219_NVDATA-2.09.03-0029_SAS2XFW-25.05.04.00_MFGIMG-25.05.04.00_2012_01_07
Bug Fixes and Enhancements:
===========================
Firmware:
=========
LSIP200223753 (DFCT) (CL LSIP200221295) Reboot Causes HSP to Revert to Unconfigured Good
LSIP200222937 (DFCT) (CL LSIP200210145) Adding/Removing FoD key causes Legacy BIOS to stop and not continue
LSIP200222809 (DFCT) Amber LED flashes during copyback after rebuilding degraded VD
LSIP200223758 (DFCT) Falcon FW - 1509/recon starting and progressing in 1.21 HII
LSIP200223351 (DFCT) (CL LSIP200223304) R5/R6 enabled using FOD and do a OCR on controller;R5 VD comes up as foreign once OCR is done
LSIP200229774 (DFCT) 10M09 Liberator: Querying SMART / PFA Status Returns All Zeros in Sense Data
LSIP200225195 (DFCT) Clearing excess drive error
LSIP200230774 (DFCT) FW fails to create configuration and utilites fail to report the VD size after the reconstruction.
LSIP200222944 (DFCT) HDD powersave options still shown in Ctrl Info,VD info & VD creation menus of HII becase FW reports it supports PS
LSIP200187938 (DFCT) SATA FDE disk not recognized as FDE, SAS model is
LSIP200223120 (DFCT) Secured Drives Counts as Two Physical Drives
LSIP200230641 (DFCT) Megamon during import of FC from MR to iMR contoller
LSIP200210843 (DFCT) Battery is < 623mAH and LUNS in writeback mode
LSIP200229432 (DFCT) Port LSIP200211420 to Liberator - Upon OCR, Recon Ghost LD needs to be created before WJ processing
LSIP200223461 (DFCT) (CL LSIP200223341) If you enable security on controller using FOD and create secure VD it goes missing upon reboot.
LSIP200221295 (DFCT) Reboot Causes HSP to Revert to Unconfigured Good
LSIP200222969 (DFCT) (RW LSIP200222956) (CL LSIP200222934) After OCR+reboot, user is asked to hit enter to ack the activated FOD features on
LSIP200199420 (DFCT) 'clear' tasks on disks always show 0% complete when doing 'init' task on RAID volume
LSIP200222391 (DFCT) BBU Charging gets disabled when Transparent Relearn fails to start due to low capacity
LSIP200223703 (DFCT) HWR: 10M09: PD other error counter never increments
LSIP200229673 (DFCT) Fix compilation issue
LSIP200230643 (DFCT) Error message pop out in HII when set to factory default.
LSIP200222594 (DFCT) Windows blue screen while in background rebuild process
LSIP200222918 (DFCT) cannot auto rebuild while we put a clean - JBOD
LSIP200222956 (DFCT) (CL LSIP200222934) After OCR+reboot, user is asked to hit enter to ack the activated FOD features on OEM system.
LSIP200210345 (CO) (auto4comp FW_SAS_LSI) Read Locate LED state via BMC
LSIP200229612 (CO) (auto4comp FW_SAS_LSI) Change EDV values in iBBU07 to improve accuracy with aging batery packs
LSIP200151207 (CR) Read Locate LED state via BMC
LSIP200224034 (CR) Change EDV values in iBBU07 to improve accuracy with aging batery packs
WebBIOS:
========
LSIP200223149 (DFCT) HII/HII browser sluggishness is seen when exiting browser, going to EFI WebBIOS, and then going back to HII browser
LSIP200223217 (DFCT) IMR-Web Bios shown Configured drives option in Manage power save settings
LSIP200230109 (DFCT) Grammatical error in WebBIOS.
LSIP200224127 (DFCT) In WebBIOS, Drive Group Definition screen, enclosures should not be selectable in the Drives column
LSIP200230031 (DFCT) In EFI-WebBIOS (ver: 4.0-e_45-Rel), the white bars do not match up under VD properties page.
BIOS:
========
Numerous UEFI and HII updates
NVDATA:
=======
Numerous NVDATA changes
Installation:
=============
Use MegaCLI to flash the SAS controllers. MegaCLI can be downloaded from the support and download
section of www.lsi.com
Command syntax: MegaCli -adpfwflash -f mr2108fw.rom -a0
Download:
http://www.lsi.com/downloads/Public/MegaRAID%20Common%20Files/MERGED_12.12.0-0102_SAS_2108_FW_Image_2.120.293-1580.zip
|
|
发表于 2016-3-29 18:54:19
收藏
转播
分享
淘帖
支持
反对