网云科技

标题: SF-2281 刷卡记录，求大侠指点 [打印本页]

作者: xvmsd8u 时间: 2016-3-29 00:57
标题: SF-2281 刷卡记录，求大侠指点

上面的我 OCZ ATG3 60G 的，闪存 MT29F32G08CBACAWP，查资料得出

这样的话，刷的就是 22220 或 22241 吧，可是配置文件显示的是

22220_fw_cl_mlc_Micron_32Gb_MT29F128G08CBACAWP_2Q_2C_1D_S_PP_R00755_s512.vic
22220_mf_mlc_Micron_32Gb_MT29F128G08CBACAWP_2Q_2C_1D_S_PP_R00755_s512.vic

22241_fw_cl_mlc_Micron_32Gb_MT29F128G08CBACAWP_2Q_2C_1D_S_PP_R00755_s512.vic
22241_mf_mlc_Micron_32Gb_MT29F128G08CBACAWP_2Q_2C_1D_S_PP_R00755_s512.vic

很明显， 32Gb 不对, MT29F128G08CBACAWP 也不对，下面是用 22220 刷新

[root@localhost YH]# lsscsi
[0:0:0:0] disk ATA    HDS728080PLAT20  PF2O  /dev/sda
[3:0:0:0] disk ATA    SandForce{200026 20DA  /dev/sdb  (这是我的待刷新的SSD硬盘）
[root@localhost YH]# cd /home/YH/SSD/SF_Genesis-v1.5
[root@localhost SF_Genesis-v1.5]# ./SF_Genesis -PROCESS_SSD 3:0:0:0 /home/YH/SSD/mpt/FW_SF-2000_MP_3-3-0_Client--123456/FW_SF-2000_MP_3-3-0_Client.123456.mfp /home/YH/SSD/mpt/FW_SF-2000_MP_3-3-0_Client--123456/Configuration_Files/22220.123456.driveconfig 12345 www_123 log=/home/YH/SSD/s60g.log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.5.21.20110919-fc14-32bit
SF_Core Library: v1.7.0.20110919-fc14-32bit

Copyright 2010-2011, SandForce Inc., All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sun 11/29/2015 19:46:18] - SF_Genesis has been invoked with the following parameters:

                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                  argv[1]: -PROCESS_SSD
                  argv[2]: 3:0:0:0
                  argv[3]: /home/YH/SSD/mpt/FW_SF-2000_MP_3-3-0_Client--123456/FW_SF-2000_MP_3-3-0_Client.123456.mfp
                  argv[4]: /home/YH/SSD/mpt/FW_SF-2000_MP_3-3-0_Client--123456/Configuration_Files/22220.123456.driveconfig
                  argv[5]: 12345
                  argv[6]: www_123
                  argv[7]: log=/home/YH/SSD/s60g.log
                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[Sun 11/29/2015 19:46:18] - Instructing the operating system to purge any existing cached data for device: '3:0:0:0'
[Sun 11/29/2015 19:49:29] - Issuing a discovery command for device: '3:0:0:0'
[Sun 11/29/2015 19:49:35] - Discovery command completed...
[Sun 11/29/2015 19:49:35] - Waiting 5 seconds for the system to settle...
[Sun 11/29/2015 19:49:40] - Device designation string '3:0:0:0' is mapped to node '/dev/sg1'
[Sun 11/29/2015 19:49:40] - Proceeding to process SSD device with the following parameters:
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
            DeviceName = /dev/sg1
MFP Package Filename = /home/YH/SSD/mpt/FW_SF-2000_MP_3-3-0_Client--123456/FW_SF-2000_MP_3-3-0_Client.123456.mfp
   Configuration File = /home/YH/SSD/mpt/FW_SF-2000_MP_3-3-0_Client--123456/Configuration_Files/22220.123456.driveconfig
            Serial No. = 12345
      World Wide Name = www_123
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[Sun 11/29/2015 19:49:52] - Successfully received the IDENTIFY data from the drive...

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SF_Internal_PackageManager::OpenExisting:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                  HeaderCRC32: -1414484761,(ABB0ACE7)
   _Package.Header.HeaderCRC32: -1414484761,(ABB0ACE7)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                  OverallCRC32: -1611059272,(9FF92FB8)
_Package.Header.OverallCRC32: -1611059272,(9FF92FB8)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sun 11/29/2015 19:49:56] - Successfully opened the package: /home/YH/SSD/mpt/FW_SF-2000_MP_3-3-0_Client--123456/FW_SF-2000_MP_3-3-0_Client.123456.mfp
[Sun 11/29/2015 19:49:56] - Successfully extracted *.DriveConfig file: /home/YH/SSD/mpt/FW_SF-2000_MP_3-3-0_Client--123456/Configuration_Files/22220.123456.driveconfig
[Sun 11/29/2015 19:49:56] - Extracted Config_ID: 1 (22220) in DriveConfig file: /home/YH/SSD/mpt/FW_SF-2000_MP_3-3-0_Client--123456/Configuration_Files/22220.123456.driveconfig
[Sun 11/29/2015 19:49:56] - Extracted SerialOutputControl: 0
[Sun 11/29/2015 19:49:56] - Successfully extracted Config record: 22220
[Sun 11/29/2015 19:49:56] - Successfully extracted flashware image: 22220_fw_cl_mlc_Micron_32Gb_MT29F128G08CBACAWP_2Q_2C_1D_S_PP_R00755_s512.vic
[Sun 11/29/2015 19:49:56] - Successfully extracted manufacturing image: 22220_mf_mlc_Micron_32Gb_MT29F128G08CBACAWP_2Q_2C_1D_S_PP_R00755_s512.vic
[Sun 11/29/2015 19:49:56] - Proceeding in non-ROM mode, Download feature 7...
[Sun 11/29/2015 19:49:56] - FATAL_ERROR: Could not download MFB to the drive...(0x11000001:SF_SG_DEVICE_CHECK_CONDITION_ERROR)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Extended Error data:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      ATA COMMAND : 0x0092  (146)
      ATA FEATURE : 0x0007  (7)
      Device Status: 0x0001  (1)
      Driver Status: 0x0000  (0)
         Host Status: 0x0008  (8)
~~~~~~~~~~~~~~
Sense Data:
~~~~~~~~~~~~~~
  0 -       No Sense: 114 (0x72) OK
  1 -  Recovered Error:  11 (0x0B) FAIL
  2 -       Not Ready: 0 (0x00) OK
  3 -    Medium Error: 0 (0x00) OK
  4 - Hardware Error: 0 (0x00) OK
  5 -  Illegal Request: 0 (0x00) OK
  6 - Unit Attention: 0 (0x00) OK
  7 -    Data Protect:  14 (0x0E) OK
  8 -    Blank Check: 9 (0x09) OK
  9 -  Vendor Specific:  12 (0x0C) OK
10 -    Copy Aborted: 0 (0x00) OK
11 -  Aborted Command: 4 (0x04) FAIL
12 - Equal Comparison: 0 (0x00) NA
13 -  Volume Overflow: 220 (0xDC) NA
14 -    Miscompare: 0 (0x00) OK
15 -       Reserved: 1 (0x01) NA
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
System Trace:
~~~~~~~~~~~~~~~~

[  750.369408] ata4.00: 64 sectors, multi 0: LBA48 NCQ (depth 0/32)
[  750.372463] ata4.00: configured for UDMA/133
[  750.372490] ata4: EH complete
[  750.372750] scsi 3:0:0:0: Direct-Access    ATA    SandForce{200026 20DA PQ: 0 ANSI: 5
[  750.381160] sd 3:0:0:0: [sdb] 64 512-byte logical blocks: (32.7 kB/32.0 KiB)
[  750.381170] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[  750.381279] sd 3:0:0:0: [sdb] Write Protect is off
[  750.381287] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[  750.381333] sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  750.382973]  sdb:
[  750.383654] sd 3:0:0:0: Attached scsi generic sg1 type 0
[  750.392761]  unknown partition table
[  750.393212] sd 3:0:0:0: [sdb] Attached SCSI disk
[  758.016314] ata4: drained 512 bytes to clear DRQ.
[  758.016332] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  758.016344] ata4.00: failed command: IDENTIFY DEVICE
[  758.016360] ata4.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
[  758.016364]       res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  758.016371] ata4.00: status: { DRDY }
[  758.016385] ata4: hard resetting link
[  758.016390] ata4: nv: skipping hardreset on occupied port
[  758.470147] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  758.473468] ata4.00: configured for UDMA/133
[  758.473522] ata4: EH complete
[  766.016273] ata4: drained 512 bytes to clear DRQ.
[  766.016307] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  766.016319] ata4.00: failed command: IDENTIFY DEVICE
[  766.016335] ata4.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
[  766.016338]       res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  766.016346] ata4.00: status: { DRDY }
[  766.016361] ata4: hard resetting link
[  766.016367] ata4: nv: skipping hardreset on occupied port
[  766.470170] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  766.473463] ata4.00: configured for UDMA/133
[  766.473517] ata4: EH complete
[  772.016277] ata4: drained 512 bytes to clear DRQ.
[  772.016296] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  772.016308] ata4.00: failed command: IDENTIFY DEVICE
[  772.016324] ata4.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
[  772.016327]       res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  772.016335] ata4.00: status: { DRDY }
[  772.016349] ata4: hard resetting link
[  772.016354] ata4: nv: skipping hardreset on occupied port
[  772.470166] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  772.473468] ata4.00: configured for UDMA/133
[  772.473522] ata4: EH complete
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[Sun 11/29/2015 19:49:56] - End of Genesis manufacturing log.
[Sun 11/29/2015 19:49:56] - Exiting...
[Sun 11/29/2015 19:49:56] - Overall Result for Device: /dev/sg1 ****** FAIL ******
[root@localhost SF_Genesis-v1.5]#

请各位大侠指点一下，出错了应该怎么刷这个 !! 先谢谢各位大侠了！

作者: nwgcopqp 时间: 2016-3-29 00:57

之前不认盘, 短接之后可以认盘, 刷卡的时候我有断开断接的.

作者: zdimc1 时间: 2016-3-29 00:57

本帖最近评分记录：共1条评分，M币+3
john_chuckM币 +3无法载入固件，你这个盘应该没重新焊过吧，短接后，量产时要把短接松开2015-11-30

数码之家22合一：性价比最高的S2拆机工具！告别CR-V，进阶级拆客必备！回复举报

离线大概没人注册

UID：1611409注册时间2014-01-27 最后登录2016-03-22 在线时间975小时发帖1582 搜Ta的帖子精华1 M币1381专家9 访问TA的空间加好友用道具

数码2段

发帖1582M币1381专家9粉丝25加关注发消息只看该作者 1楼发表于: 2015-11-30

帮顶，我的可以认盘，就是不能格式化

作者: gqezm2 时间: 2016-3-29 00:57

无法载入固件，你这个盘应该没重新焊过吧，短接后，量产时要把短接松开

作者: kw1h8d3 时间: 2016-3-29 00:57

为何短接，想量产直接2281量产工具就行！

作者: qeyfg82 时间: 2016-3-29 00:57

SATA3.0下不行，改用SATA2.0试下。

作者: z8kz88 时间: 2016-3-29 00:57

522 版没有 22220 或 22241，这个也没有 MT29F128G08CBACAWP

作者: mt5pzt6 时间: 2016-3-29 00:57

谢谢, 我试试!

作者: xb4fdzc 时间: 2016-3-29 00:57

这个F在522固件里也有啊,而且是Gold版的,换那个试试

作者: wq7dz8 时间: 2016-3-29 00:57

没重新焊过, 用着用着不认盘了, 看论坛上的网友说短接之后开卡, 我短接了可以认盘, 刷卡的时候有把短接松开的. 但是刷卡的时候出现了上面的错误.

欢迎光临网云科技 (http://www.8x6x.com/)