网云科技

标题: 2281开卡失败 求教~ [打印本页]

作者: v4km6zx    时间: 2016-3-29 00:30
标题: 2281开卡失败 求教~




[ni@localhost ~]$ su
密码:
su: 密码不正确
[ni@localhost ~]$ su
密码:
[root@localhost ni]# cd sf
[root@localhost sf]# ./SF_Genesis -PROCESS_SSD 3:0:0:0 /home/ni/fw/FW_SF-2000_MP_5-0-7_Client.1.mfp /home/ni/fw/Configuration_Files/22119.1.driveconfig 12345 www_123 log=
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.5.21.20110919-fc14-32bit
SF_Core Library: v1.7.0.20110919-fc14-32bit
Copyright 2010-2011, SandForce Inc., All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Mon 07/07/2014 08:38:37] - SF_Genesis has been invoked with the following parameters:
                     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                      argv[1]: -PROCESS_SSD
                      argv[2]: 3:0:0:0
                      argv[3]: /home/ni/fw/FW_SF-2000_MP_5-0-7_Client.1.mfp
                      argv[4]: /home/ni/fw/Configuration_Files/22119.1.driveconfig
                      argv[5]: 12345
                      argv[6]: www_123
                      argv[7]: log=
                     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[Mon 07/07/2014 08:38:37] - Instructing the operating system to purge any existing cached data for device: '3:0:0:0'
[Mon 07/07/2014 08:38:42] - Issuing a discovery command for device: '3:0:0:0'
[Mon 07/07/2014 08:38:48] - Discovery command completed...
[Mon 07/07/2014 08:38:48] - Waiting 5 seconds for the system to settle...
[Mon 07/07/2014 08:38:53] - Device designation string '3:0:0:0' is mapped to node '/dev/sg1'
[Mon 07/07/2014 08:38:53] - Proceeding to process SSD device with the following parameters:
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
              DeviceName = /dev/sg1
    MFP Package Filename = /home/ni/fw/FW_SF-2000_MP_5-0-7_Client.1.mfp
      Configuration File = /home/ni/fw/Configuration_Files/22119.1.driveconfig
              Serial No. = 12345
         World Wide Name = www_123
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Mon 07/07/2014 08:38:53] - Successfully received the IDENTIFY data from the drive...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SF_Internal_PackageManager::OpenExisting:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                     HeaderCRC32: -1448548789,(A9A8E64B)
     _Package.Header.HeaderCRC32: -1448548789,(A9A8E64B)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                    OverallCRC32: -246870280,(F1490EF8)
    _Package.Header.OverallCRC32: -246870280,(F1490EF8)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Mon 07/07/2014 08:38:55] - Successfully opened the package: /home/ni/fw/FW_SF-2000_MP_5-0-7_Client.1.mfp
[Mon 07/07/2014 08:38:55] - Successfully extracted *.DriveConfig file: /home/ni/fw/Configuration_Files/22119.1.driveconfig
[Mon 07/07/2014 08:38:55] - Extracted Config_ID: 1 (22119) in DriveConfig file: /home/ni/fw/Configuration_Files/22119.1.driveconfig
[Mon 07/07/2014 08:38:55] - Extracted SerialOutputControl: 0
[Mon 07/07/2014 08:38:55] - Successfully extracted Config record: 22119
[Mon 07/07/2014 08:38:55] - Successfully extracted flashware image: 22119_fw_cl_slc_Toshiba_16Gb_TH58TAG6S2FBA89_2Q_4C_1D_PP_R00473_s512.vic
[Mon 07/07/2014 08:38:55] - Successfully extracted manufacturing image: 22119_mf_slc_Toshiba_16Gb_TH58TAG6S2FBA89_2Q_4C_1D_PP_R00473_s512.vic
[Mon 07/07/2014 08:38:55] - Proceeding in ROM mode, download feature 1...
[Mon 07/07/2014 08:38:55] - Successfully downloaded MFB to the drive...
[Mon 07/07/2014 08:38:55] - Waiting (5 sec) for the drive to settle...
[Mon 07/07/2014 08:39:00] - Successfully received the IDENTIFY data from the drive...
[Mon 07/07/2014 08:39:00] - Firmware revision reported to be: '507ABBM0'.  This indicates MFB download was successful.
[Mon 07/07/2014 08:39:00] - Successfully enabled SMART capabilities...
[Mon 07/07/2014 08:39:02] - Successfully issued a diagnostic unlock...
[Mon 07/07/2014 08:39:02] - Performing the flash test of block 0 (0x0000)...
[Mon 07/07/2014 08:45:54] - Flash Test Results:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----------------------------------------------------------------------------
Flash Test Parameters:                             
-----------------------------------------------------------------------------
               Block Count: 3                     
                Page Count: 1                     
                 Bus Count: 0                     
        Chip Enabled Count: 1                     
                 Die Count: 0                     
                Lane Count: 0                     
               Plane Count: 0                     
-----------------------------------------------------------------------------
Results Notes:                                      
-----------------------                              
   N1 - At least one page tested and passed with no bit errors.
   N2 - No test data available.  Test may have aborted, or failed during the testing.
   N3 - At least one page tested and had errors less than or equal to half the range of ECC correction power.
   N4 - At least  one erased page tested had bit error rate greater than half the correction power.
   N5 - Walking zeros test failed.
   N6 - Walking ones test failed.
   N7 - Block contained factory bad block markings and testing was skipped.
   N8 - At least one page tested and had bit error rate greater than the correction power on plane 0.
   N9 - Block in plane 0 was marked as a factory bad block.
  N10 - At least one page tested and had bit error rate greater than the correction power on plane 1.
  N11 - Block in plane 1 was marked as a factory bad block.
-----------------------------------------------------------------------------

+------+------+------+------+--------+--------------------------------------------+---------+
| Bus  | CE   | Die  | Lane | Value  | Result Notes                               | Overall |
+------+------+------+------+--------+--------------------------------------------+---------+

-----------------------------------------------------------------------------
  Total Number of test results: 0                     
            Number of failures: 0                     
         Number of Passed with warnings: 0                     
      No. Passed without warnings: 0                     
-----------------------------------------------------------------------------

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Mon 07/07/2014 08:45:54] - FATAL_ERROR: Could not perform the DiagIdentify() operation on the drive... (0x12000004:SF_SG_HOST_BAD_TARGET_ERROR)
[Mon 07/07/2014 08:45:54] - End of Genesis manufacturing log.
[Mon 07/07/2014 08:45:54] - Exiting...
[Mon 07/07/2014 08:45:54] - Overall Result for Device: /dev/sg1 ****** FAIL ******
[root@localhost sf]#


这是日志~ 失败原因不明  求指导~


作者: rt3nolc8    时间: 2016-3-29 00:30


Bus  | CE   | Die  | Lane | Value  | Result Notes                               | Overall |




应该有东西,你这才跑30%都没到吧




作者: q3tmv3z4    时间: 2016-3-29 00:30


坐等高手解答


作者: 65weldo    时间: 2016-3-29 00:30


玩2281的都是大牛,我等只能围观


作者: 8wkxob4    时间: 2016-3-29 00:30


同样坎坷的帮顶


作者: 5x5jc8    时间: 2016-3-29 00:30


SandForce Genesis Utility v1.5.21.20110919-fc14-32bit
SF_Core Library: v1.7.0.20110919-fc14-32bit
Copyright 2010-2011, SandForce Inc., All Rights Reserved Worldwide.

用的那个版本的工具

你更改好了配置文件了吗

你用命令模式吧,


作者: yi11l8    时间: 2016-3-29 00:30


FLASH芯片没有认到  严重怀疑楼主焊工



作者: 8g4p5ct    时间: 2016-3-29 00:30


一个F都没有。好神奇。



作者: 1vxwwl    时间: 2016-3-29 00:30


内存都没有检查到。


作者: mrupis1    时间: 2016-3-29 00:30


歡迎探討   这都能被你看出来被你






欢迎光临 网云科技 (http://www.8x6x.com/) Powered by Discuz! X3.2