网云科技

标题: SF2281报错Process exited with code 0 [打印本页]

作者: rpktply 时间: 2016-3-29 00:14
标题: SF2281报错Process exited with code 0

我贴8片acmf3
SF2281报错Process exited with code 0

Starting command:[/root/soft/SF_Genesis-v1.5.21.20110919-fc14-32bit/SF_Genesis -PROCESS_SSD 2:0:0:0 "/root/fw/FW_SF-2000_MP_5-0-7_Client--12345600/FW_SF-2000_MP_5-0-7_Client.12345600.mfp" "/root/fw/FW_SF-2000_MP_5-0-7_Client--12345600/22373.12345600.driveconfig" 2 2  LOG="/root/fw/FW_SF-2000_MP_5-0-7_Client--12345600/2_localhost.localdomain_DATETIMESTAMP_2.0.0.0_PROCESS_SSD_RESULT.log" ]...

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.5.21.20110919-fc14-32bit
SF_Core Library: v1.7.0.20110919-fc14-32bit

Copyright 2010-2011, SandForce Inc., All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Thu 02/17/2011 05:41:31] - SF_Genesis has been invoked with the following parameters:

                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                  argv[1]: -PROCESS_SSD
                  argv[2]: 2:0:0:0
                  argv[3]: /root/fw/FW_SF-2000_MP_5-0-7_Client--12345600/FW_SF-2000_MP_5-0-7_Client.12345600.mfp
                  argv[4]: /root/fw/FW_SF-2000_MP_5-0-7_Client--12345600/22373.12345600.driveconfig
                  argv[5]: 2
                  argv[6]: 2
                  argv[7]: LOG=/root/fw/FW_SF-2000_MP_5-0-7_Client--12345600/2_localhost.localdomain_DATETIMESTAMP_2.0.0.0_PROCESS_SSD_RESULT.log
                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[Thu 02/17/2011 05:41:31] - Instructing the operating system to purge any existing cached data for device: '2:0:0:0'
[Thu 02/17/2011 05:41:36] - Issuing a discovery command for device: '2:0:0:0'
[Thu 02/17/2011 05:41:41] - Discovery command completed...
[Thu 02/17/2011 05:41:41] - Waiting 5 seconds for the system to settle...
[Thu 02/17/2011 05:41:46] - Device designation string '2:0:0:0' is mapped to node '/dev/sg0'
[Thu 02/17/2011 05:41:46] - Proceeding to process SSD device with the following parameters:
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
            DeviceName = /dev/sg0
MFP Package Filename = /root/fw/FW_SF-2000_MP_5-0-7_Client--12345600/FW_SF-2000_MP_5-0-7_Client.12345600.mfp
   Configuration File = /root/fw/FW_SF-2000_MP_5-0-7_Client--12345600/22373.12345600.driveconfig
            Serial No. = 2
      World Wide Name = 2
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[Thu 02/17/2011 05:41:46] - Successfully received the IDENTIFY data from the drive...

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SF_Internal_PackageManager::OpenExisting:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                  HeaderCRC32: -1161260662,(BAC8918A)
   _Package.Header.HeaderCRC32: -1161260662,(BAC8918A)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                  OverallCRC32:  864041271,(33803937)
_Package.Header.OverallCRC32:  864041271,(33803937)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Process exited with code 0

作者: y9ek6e2 时间: 2016-3-29 00:14

我也碰过1.62 code0用1.7就code20了，没焊好

作者: schuwvi 时间: 2016-3-29 00:14

同样问题求解决

作者: 3nf4qq 时间: 2016-3-29 00:14

倒萨可耗费了看似简单划分立刻集散地

作者: j7pq5x 时间: 2016-3-29 00:14

我解决了,不是F的焊接问题,是诈尸炖的绿板天生缺好几个电阻,全部补上,然后换成1.7版本的工具,直接就过了

作者: h375k18 时间: 2016-3-29 00:14

鸟语捉鸡，只能傻看，这个翻译跟没翻译有啥区别？

作者: wwdq2z 时间: 2016-3-29 00:14

看不懂只能路过

作者: lozfhxt 时间: 2016-3-29 00:14

It happens sometimes

作者: u2zyca44 时间: 2016-3-29 00:14

没人解决，换f重焊

作者: j111b4r 时间: 2016-3-29 00:14

请键入文字或网站地址，或者上传文档。
取消
启动命令：[/根/柔软/ SF_Genesis-v1.5.21.20110919-fc14-32bit/ SF_Genesis-PROCESS_SSD2：0：0：0“/根/ FW/ FW_SF-2000_MP_5-0-7_Client - 12345600/ FW_SF- 2000_MP_5-0-7_Client.12345600.mfp“”/root/fw/FW_SF-2000_MP_5-0-7_Client - 12345600/22371.12345600.driveconfig“22 LOG="/root/fw/FW_SF-2000_MP_5-0-7_Client--12345600/2_localhost.localdomain_DATETIMESTAMP_2.0.0.0_PROCESS_SSD_RESULT.log" ] ...

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce的成因实用v1.5.21.20110919-fc14-32bit
SF_Core图书馆：v1.7.0.20110919-fc14-32bit

版权所有2010-2011，采用SandForce公司，版权所有全世界。
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[周四02/17/20115时27分58秒] - SF_Genesis已被调用，其参数如下：

                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~
                  的argv[1]：-PROCESS_SSD
                  的argv[2]：2：0：0：0
                  的argv[3]：/root/fw/FW_SF-2000_MP_5-0-7_Client - 12345600/FW_SF-2000_MP_5-0-7_Client.12345600.mfp
                  的argv[4]：/root/fw/FW_SF-2000_MP_5-0-7_Client - 12345600/22371.12345600.driveconfig
                  的argv[5]：2
                  的argv[6]：2
                  的argv[7]： LOG=/root/fw/FW_SF-2000_MP_5-0-7_Client--12345600/2_localhost.localdomain_DATETIMESTAMP_2.0.0.0_PROCESS_SSD_RESULT.log
                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~

[周四02/17/20115时27分58秒] - 指示操作系统，以清除任何现有的缓存数据的设备：“2：0：0：0
[周四02/17/20115时28分03秒] - 发出命令发现的设备：“2：0：0：0
[周四02/17/20115时28分09秒] - 发现命令完成...
[周四02/17/20115时28分09秒] - 等待5秒钟，系统解决...
[周四02/17/20115时28分14秒] - 设备名称字符串“2：0：0：0被映射到节点'的/ dev/ SG0'
[周四02/17/20115时28分14秒] - 出发来处理具有以下参数的SSD装置：
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
            设备名称=的/ dev/ SG0
多功能一体机包文件名=/root/fw/FW_SF-2000_MP_5-0-7_Client - 12345600/FW_SF-2000_MP_5-0-7_Client.12345600.mfp
   配置文件=/root/fw/FW_SF-2000_MP_5-0-7_Client - 12345600/22371.12345600.driveconfig
            编号=2
      全球通用名称=2
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[周四02/17/20115时28分14秒] - 成功收到从驱动器中的数据识别...

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~
SF_Internal_PackageManager:: OpenExisting：
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                  HeaderCRC32：-1161260662（BAC8918A）
   _Package.Header.HeaderCRC32：-1161260662（BAC8918A）
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                  OverallCRC32：864041271，（33803937）
_Package.Header.OverallCRC32：864041271，（33803937）
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~

过程中退出，代码为0

欢迎光临网云科技 (http://www.8x6x.com/)