2281开卡失败 求教~
$ su
密码：
su: 密码不正确
$ su
密码：
# cd sf
# ./SF_Genesis -PROCESS_SSD 3:0:0:0 /home/ni/fw/FW_SF-2000_MP_5-0-7_Client.1.mfp /home/ni/fw/Configuration_Files/22119.1.driveconfig 12345 www_123 log=
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.5.21.20110919-fc14-32bit
SF_Core Library: v1.7.0.20110919-fc14-32bit
Copyright 2010-2011, SandForce Inc., All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- SF_Genesis has been invoked with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
argv: -PROCESS_SSD
argv: 3:0:0:0
argv: /home/ni/fw/FW_SF-2000_MP_5-0-7_Client.1.mfp
argv: /home/ni/fw/Configuration_Files/22119.1.driveconfig
argv: 12345
argv: www_123
argv: log=
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- Instructing the operating system to purge any existing cached data for device: '3:0:0:0'
- Issuing a discovery command for device: '3:0:0:0'
- Discovery command completed...
- Waiting 5 seconds for the system to settle...
- Device designation string '3:0:0:0' is mapped to node '/dev/sg1'
- Proceeding to process SSD device with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DeviceName = /dev/sg1
MFP Package Filename = /home/ni/fw/FW_SF-2000_MP_5-0-7_Client.1.mfp
Configuration File = /home/ni/fw/Configuration_Files/22119.1.driveconfig
Serial No. = 12345
World Wide Name = www_123
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- Successfully received the IDENTIFY data from the drive...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SF_Internal_PackageManager::OpenExisting:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
HeaderCRC32: -1448548789,(A9A8E64B)
_Package.Header.HeaderCRC32: -1448548789,(A9A8E64B)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
OverallCRC32: -246870280,(F1490EF8)
_Package.Header.OverallCRC32: -246870280,(F1490EF8)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- Successfully opened the package: /home/ni/fw/FW_SF-2000_MP_5-0-7_Client.1.mfp
- Successfully extracted *.DriveConfig file: /home/ni/fw/Configuration_Files/22119.1.driveconfig
- Extracted Config_ID: 1 (22119) in DriveConfig file: /home/ni/fw/Configuration_Files/22119.1.driveconfig
- Extracted SerialOutputControl: 0
- Successfully extracted Config record: 22119
- Successfully extracted flashware image: 22119_fw_cl_slc_Toshiba_16Gb_TH58TAG6S2FBA89_2Q_4C_1D_PP_R00473_s512.vic
- Successfully extracted manufacturing image: 22119_mf_slc_Toshiba_16Gb_TH58TAG6S2FBA89_2Q_4C_1D_PP_R00473_s512.vic
- Proceeding in ROM mode, download feature 1...
- Successfully downloaded MFB to the drive...
- Waiting (5 sec) for the drive to settle...
- Successfully received the IDENTIFY data from the drive...
- Firmware revision reported to be: '507ABBM0'.This indicates MFB download was successful.
- Successfully enabled SMART capabilities...
- Successfully issued a diagnostic unlock...
- Performing the flash test of block 0 (0x0000)...
- Flash Test Results:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----------------------------------------------------------------------------
Flash Test Parameters:
-----------------------------------------------------------------------------
Block Count: 3
Page Count: 1
Bus Count: 0
Chip Enabled Count: 1
Die Count: 0
Lane Count: 0
Plane Count: 0
-----------------------------------------------------------------------------
Results Notes:
-----------------------
N1 - At least one page tested and passed with no bit errors.
N2 - No test data available.Test may have aborted, or failed during the testing.
N3 - At least one page tested and had errors less than or equal to half the range of ECC correction power.
N4 - At leastone erased page tested had bit error rate greater than half the correction power.
N5 - Walking zeros test failed.
N6 - Walking ones test failed.
N7 - Block contained factory bad block markings and testing was skipped.
N8 - At least one page tested and had bit error rate greater than the correction power on plane 0.
N9 - Block in plane 0 was marked as a factory bad block.
N10 - At least one page tested and had bit error rate greater than the correction power on plane 1.
N11 - Block in plane 1 was marked as a factory bad block.
-----------------------------------------------------------------------------
+------+------+------+------+--------+--------------------------------------------+---------+
| Bus| CE | Die| Lane | Value| Result Notes | Overall |
+------+------+------+------+--------+--------------------------------------------+---------+
-----------------------------------------------------------------------------
Total Number of test results: 0
Number of failures: 0
Number of Passed with warnings: 0
No. Passed without warnings: 0
-----------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- FATAL_ERROR: Could not perform the DiagIdentify() operation on the drive... (0x12000004:SF_SG_HOST_BAD_TARGET_ERROR)
- End of Genesis manufacturing log.
- Exiting...
- Overall Result for Device: /dev/sg1 ****** FAIL ******
#
这是日志~ 失败原因不明求指导~
Bus| CE | Die| Lane | Value| Result Notes | Overall |
应该有东西，你这才跑30%都没到吧
坐等高手解答
玩2281的都是大牛，我等只能围观
同样坎坷的帮顶
SandForce Genesis Utility v1.5.21.20110919-fc14-32bit
SF_Core Library: v1.7.0.20110919-fc14-32bit
Copyright 2010-2011, SandForce Inc., All Rights Reserved Worldwide.
用的那个版本的工具
你更改好了配置文件了吗
你用命令模式吧，
FLASH芯片没有认到严重怀疑楼主焊工
一个F都没有。好神奇。
内存都没有检查到。
歡迎探討 这都能被你看出来被你
页:
[1]