OCZ Agility 3 重新开卡失败求助
１２０Ｇ ＯＣＺ掉盘了就想从新开卡，但是总是刷不了固件。。。。。
另外这盘的Ｆ是大Ｓ ＰＦ４１２ ＡＬ，我用老固件22214 ＳＦ－２２８１ １２０ＧＢ Ｍｉｃｒｏｎ２５ ＭＬＣ ＴＳＯＰ １６ｘＭＴ２９Ｆ６４Ｇ０８ＣＢＡＡＡＷＰ，这个是对的么？
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝ - Instructing the operating system to purge any existing cached data for device: '1:0:0:0'
- Issuing a discovery command for device: '1:0:0:0'
- Discovery command completed...
- Waiting 5 seconds for the system to settle...
- Device designation string '1:0:0:0' is mapped to node '/dev/sg1'
- Proceeding to process SSD device with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DeviceName = /dev/sg1
MFP Package Filename = /MPT/FW_SF-2000_MP_5-0-7_Client--1234/FW_SF-2000_MP_5-0-7_Client.1234.mfp
Configuration File = /SOFT/22214.1234.V507.driveconfig
Serial No. = 11114
World Wide Name = 11114
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- Successfully received the IDENTIFY data from the drive...
- Validating Manufacturing Firmware Package: /MPT/FW_SF-2000_MP_5-0-7_Client--1234/FW_SF-2000_MP_5-0-7_Client.1234.mfp
- Successfully opened the package: /MPT/FW_SF-2000_MP_5-0-7_Client--1234/FW_SF-2000_MP_5-0-7_Client.1234.mfp
- file/SOFT/22214.1234.V507.driveconfig Loaded successfully
- Warning:Unable to query diagnostics information to perform power management settings check
- B01 Power Management configuration request detected
- Successfully extracted *.DriveConfig file: /SOFT/22214.1234.V507.driveconfig
- Extracted Config_ID: 1 (22214) in DriveConfig file: /SOFT/22214.1234.V507.driveconfig
- Extracted SerialOutputControl: 0
- Searching for flashware image for configuration 22214
- Manifest found for configuration 22214
- Flashware image extracted: 22214_fw_cl_mlc_Micron_64Gb_MT29F64G08CBAAAWP_2Q_1C_1D_PP_R00751_s512.vic
- Searching for manufacturing image for configuration 22214
- Manifest found for configuration 22214
- Manufacturing image extracted: 22214_mf_mlc_Micron_64Gb_MT29F64G08CBAAAWP_2Q_1C_1D_PP_R00751_s512.vic
- Proceeding in ROM mode, download feature 3...
- FATAL_ERROR: Could not download MFB to the drive...(0x11000001:SF_SG_DEVICE_CHECK_CONDITION_ERROR)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Extended Error data:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ATA COMMAND : 0x0092(146)
ATA FEATURE : 0x0003(3)
Device Status: 0x0001(1)
Driver Status: 0x0000(0)
Host Status: 0x0008(8)
~~~~~~~~~~~~~~
Sense Data:
~~~~~~~~~~~~~~
0 - No Sense: 114 (0x72) OK
1 -Recovered Error:11 (0x0B) FAIL
2 - Not Ready: 0 (0x00) OK
3 - Medium Error: 0 (0x00) OK
4 - Hardware Error: 0 (0x00) OK
5 -Illegal Request: 0 (0x00) OK
6 - Unit Attention: 0 (0x00) OK
7 - Data Protect:14 (0x0E) OK
8 - Blank Check: 9 (0x09) OK
9 -Vendor Specific:12 (0x0C) OK
10 - Copy Aborted: 0 (0x00) OK
11 -Aborted Command: 0 (0x00) OK
12 - Equal Comparison: 0 (0x00) NA
13 -Volume Overflow: 1 (0x01) NA
14 - Miscompare: 0 (0x00) OK
15 - Reserved: 224 (0xE0) NA
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
System Trace:
~~~~~~~~~~~~~~~~
sd 1:0:0:0: Add. Sense: No additional sense information
ata2.00: disabled
ata2.00: hard resetting link
ata2.01: hard resetting link
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.00: ATA-8: SandForce{200026BB}, 20DABBR0, max UDMA/133
ata2.00: 64 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
ata2: EH complete
scsi 1:0:0:0: Direct-Access ATA SandForce{200026 20DA PQ: 0 ANSI: 5
sd 1:0:0:0: 64 512-byte logical blocks: (32.7 kB/32.0 KiB)
sd 1:0:0:0: 4096-byte physical blocks
sd 1:0:0:0: Write Protect is off
sd 1:0:0:0: Mode Sense: 00 3a 00 00
sd 1:0:0:0: Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb:
sd 1:0:0:0: Attached scsi generic sg1 type 0
unknown partition table
sd 1:0:0:0: Attached SCSI disk
ata2: lost interrupt (Status 0x58)
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata2.00: failed command: DOWNLOAD MICROCODE
ata2.00: cmd 92/03:80:00:00:00/00:00:00:00:00/00 tag 0 pio 65536 out
res 40/00:01:e0:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: hard resetting link
ata2.01: hard resetting link
ata2.01: failed to resume link (SControl 0)
ata2.00: link is slow to respond, please be patient (ready=0)
ata2.00: SRST failed (errno=-16)
ata2.00: hard resetting link
ata2.01: hard resetting link
ata2.01: failed to resume link (SControl 0)
ata2.00: link is slow to respond, please be patient (ready=0)
ata2.00: SRST failed (errno=-16)
ata2.00: hard resetting link
ata2.01: hard resetting link
ata2.01: failed to resume link (SControl 0)
ata2.00: link is slow to respond, please be patient (ready=0)
ata2.00: SRST failed (errno=-16)
ata2.00: hard resetting link
ata2.01: hard resetting link
ata2.01: failed to resume link (SControl 0)
ata2.00: SRST failed (errno=-16)
ata2.00: reset failed, giving up
ata2.00: disabled
ata2: EH complete
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- End of Genesis manufacturing log.
- Exiting...
507、522的22214似乎都是64GB:
http://haitao.8x6x.com:899/123/14771-103_807862_2104ac4397c8703.jpg
http://haitao.8x6x.com:899/123/5125-103_807862_ed30134dbad0d7b.jpg
本帖最近评分记录：共条评分
回复 举报
离线demiurge3141
http://haitao.8x6x.com:899/123/9718-14.jpg
UID：1862164注册时间2015-04-13 最后登录2015-12-18 在线时间27小时 发帖37 搜Ta的帖子 精华0 M币-300专家0 访问TA的空间加好友用道具
http://haitao.8x6x.com:899/123/9718-14.jpg
数码8级
http://haitao.8x6x.com:899/123/7521-1.gif
发帖37M币-300专家0粉丝4加关注 发消息 只看该作者 6楼 发表于: 2015-05-04
部分成功了。原来是主板问题。H61太新了，换了一片775主板就可以了。但是问题来了，128G的F只开出64G，这怎么解决？？？应该是固件错了。哪一个MT29F64G08CBAAA的固件是SF2281 120/128G的？我用了507的22214。
有啊，认出sandforce盘了，但是一开始写入固件就失败
ata2.00: ATA-8: SandForce{200026BB}, 20DABBR0, max UDMA/133
ata2.00: 64 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
ata2: EH complete
scsi 1:0:0:0: Direct-Access ATA SandForce{200026 20DA PQ: 0 ANSI: 5
sd 1:0:0:0: 64 512-byte logical blocks: (32.7 kB/32.0 KiB)
sd 1:0:0:0: 4096-byte physical blocks
sd 1:0:0:0: Write Protect is off
sd 1:0:0:0: Mode Sense: 00 3a 00 00
sd 1:0:0:0: Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb:
sd 1:0:0:0: Attached scsi generic sg1 type 0
unknown partition table
sd 1:0:0:0: Attached SCSI disk
就是这里开始出错了。。。。
ata2: lost interrupt (Status 0x58)
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata2.00: failed command: DOWNLOAD MICROCODE
你是不是该选22189的配置文件啊
本帖最近评分记录：共条评分
回复 举报
离线demiurge3141
http://haitao.8x6x.com:899/123/9718-14.jpg
UID：1862164注册时间2015-04-13 最后登录2015-12-18 在线时间27小时 发帖37 搜Ta的帖子 精华0 M币-300专家0 访问TA的空间加好友用道具
http://haitao.8x6x.com:899/123/9718-14.jpg
数码8级
http://haitao.8x6x.com:899/123/7521-1.gif
发帖37M币-300专家0粉丝4加关注 发消息 只看该作者 9楼 发表于: 2015-05-04
对22189 开出120了，不过现在用着死机了。。
另外教材里面说开卡失败短接 GPIO1 和 WP0就是一般短接认卡么？
内容短接插sata口，看看有没有认sandforce盘有了就打开开卡工具，开始写入固件了，就松开短接
开卡前先短接。。。配置文件要选好。。。话说你也不发张图。。怎么指点你？
http://haitao.8x6x.com:899/123/214-103_1862164_d52b86f34be79d1.jpg
http://haitao.8x6x.com:899/123/27919-103_1862164_7d311dda12b3aab.jpg
请问要短接到什么时候？我都是开机过BIOS了就断了，进入系统lsscsi还是可以看到sandforce 盘，然后我跑开卡工具，都一路没有短接了。
F是大S PF412 AL 好像是镁光 MT29F64G08CBAAA的黑片。我用了507固件包里面的 22214固件。 选错固件也会写不进去么？大S PF412 AL
要用哪一个？
页:
[1]