求救下，帮看看开卡的问题出在哪边。

m0l01ehz 发表于 2016-3-28 23:54:45

开卡失败，焊接放大镜检查过了，没有虚焊没有短路.SF2281的主控，用的是29f64g08cbaaawp的F，准备先焊4片开个32G的试试看的。一直失败中。配置中，电源保护开了，温度选项选择的TM75的。

下面是开卡的log

Starting command:...

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit
SF_Core Library: v1.7.1.20130612-fc14-32bit

Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- SF_Genesis has been invoked with the following parameters:

                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                  argv: -PROCESS_SSD
                  argv: 2:0:0:0
                  argv: /root/mpt/FW_SF-2000_MP_5-0-7_Client--123456/FW_SF-2000_MP_5-0-7_Client.123456.mfp
                  argv: /root/mpt/22454.123456.driveconfig
                  argv: 2281
                  argv: 2281
                  argv: LOG=/root/mpt/FW_SF-2000_MP_5-0-7_Client--123456/2281_ddk_DATETIMESTAMP_2.0.0.0_PROCESS_SSD_RESULT.log
                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

- Instructing the operating system to purge any existing cached data for device: '2:0:0:0'
- Issuing a discovery command for device: '2:0:0:0'
- Discovery command completed...
- Waiting 5 seconds for the system to settle...
- Device designation string '2:0:0:0' is mapped to node '/dev/sg2'
- Proceeding to process SSD device with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
         DeviceName = /dev/sg2
MFP Package Filename = /root/mpt/FW_SF-2000_MP_5-0-7_Client--123456/FW_SF-2000_MP_5-0-7_Client.123456.mfp
   Configuration File = /root/mpt/22454.123456.driveconfig
         Serial No. = 2281
      World Wide Name = 2281
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

- Successfully received the IDENTIFY data from the drive...
- Validating Manufacturing Firmware Package: /root/mpt/FW_SF-2000_MP_5-0-7_Client--123456/FW_SF-2000_MP_5-0-7_Client.123456.mfp
- Successfully opened the package: /root/mpt/FW_SF-2000_MP_5-0-7_Client--123456/FW_SF-2000_MP_5-0-7_Client.123456.mfp
- file/root/mpt/22454.123456.driveconfig Loaded successfully
- Warning:Unable to query diagnostics information to perform power management settings check
- B01 Power Management configuration request detected
- Successfully extracted *.DriveConfig file: /root/mpt/22454.123456.driveconfig
- Extracted Config_ID: 1 (22454) in DriveConfig file: /root/mpt/22454.123456.driveconfig
- Extracted SerialOutputControl: 0
- Searching for flashware image for configuration 22454
- Manifest found for configuration 22454
- Flashware image extracted: 22454_fw_cl_mlc_Micron_64Gb_MT29F64G08CBAAAWP_1Q_1C_1D_PP_R00819_s512.vic
- Searching for manufacturing image for configuration 22454
- Manifest found for configuration 22454
- Manufacturing image extracted: 22454_mf_mlc_Micron_64Gb_MT29F64G08CBAAAWP_1Q_1C_1D_PP_R00819_s512.vic
- Proceeding in ROM mode, download feature 3...
- FATAL_ERROR: Could not download MFB to the drive...(0x11000001:SF_SG_DEVICE_CHECK_CONDITION_ERROR)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Extended Error data:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      ATA COMMAND : 0x0092(146)
      ATA FEATURE : 0x0003(3)
      Device Status: 0x0001(1)
      Driver Status: 0x0000(0)
      Host Status: 0x0008(8)
~~~~~~~~~~~~~~
Sense Data:
~~~~~~~~~~~~~~
0 -       No Sense: 114 (0x72) OK
1 -Recovered Error:11 (0x0B) FAIL
2 -    Not Ready: 0 (0x00) OK
3 - Medium Error: 0 (0x00) OK
4 - Hardware Error: 0 (0x00) OK
5 -Illegal Request: 0 (0x00) OK
6 - Unit Attention: 0 (0x00) OK
7 - Data Protect:14 (0x0E) OK
8 -    Blank Check: 9 (0x09) OK
9 -Vendor Specific:12 (0x0C) OK
10 - Copy Aborted: 0 (0x00) OK
11 -Aborted Command: 0 (0x00) OK
12 - Equal Comparison: 0 (0x00) NA
13 -Volume Overflow: 0 (0x00) NA
14 -    Miscompare: 0 (0x00) OK
15 -       Reserved: 128 (0x80) NA
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
System Trace:
~~~~~~~~~~~~~~~~

ata3.00: failed command: STANDBY IMMEDIATE
ata3.00: cmd e0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
      res 51/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3.00: device reported invalid CHS sector 0
sd 2:0:0:0: START_STOP FAILED
sd 2:0:0:0: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 2:0:0:0: Sense Key : Aborted Command
sd 2:0:0:0: Add. Sense: No additional sense information
ata3.00: disabled
ata3: hard resetting link
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: SandForce{200026BB}, 20DABBR0, max UDMA/133
ata3.00: 64 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
ata3: EH complete
scsi 2:0:0:0: Direct-Access ATA    SandForce{200026 20DA PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: 64 512-byte logical blocks: (32.7 kB/32.0 KiB)
sd 2:0:0:0: 4096-byte physical blocks
sd 2:0:0:0: Write Protect is off
sd 2:0:0:0: Mode Sense: 00 3a 00 00
sd 2:0:0:0: Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdc: unknown partition table
sd 2:0:0:0: Attached SCSI disk
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata3.00: failed command: DOWNLOAD MICROCODE
ata3.00: cmd 92/03:66:00:80:01/00:00:00:00:00/00 tag 0 pio 52224 out
      res 40/00:00:80:00:00/00:00:00:00:00/e0 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: hard resetting link
ata3: link is slow to respond, please be patient (ready=0)
ata3: SRST failed (errno=-16)
ata3: hard resetting link
ata3: link is slow to respond, please be patient (ready=0)
ata3: SRST failed (errno=-16)
ata3: hard resetting link
ata3: link is slow to respond, please be patient (ready=0)
ata3: SRST failed (errno=-16)
ata3: limiting SATA link speed to 1.5 Gbps
ata3: hard resetting link
ata3: SRST failed (errno=-16)
ata3: reset failed, giving up
ata3.00: disabled
ata3: EH complete
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

- End of Genesis manufacturing log.
- Exiting...
- Overall Result for Device: /dev/sg2 ****** FAIL ******

Process exited with code 20

http://haitao.8x6x.com:899/123/24343-103_1348281_eac4c1136fed5d5.jpg 描述:是

cw1sodg 发表于 2016-3-28 23:54:45

就是不需要toggle跳线所以你需要改成ONFI异步跳线啊……

jut5u5oq 发表于 2016-3-28 23:54:45

我再检查焊接看看。20能不能具体的看出是虚焊或者是短路

p20e5fdh 发表于 2016-3-28 23:54:45

你主板的AHCI支持是原生的还是兼容的？http://haitao.8x6x.com:899/123/134-01.png

内容来自Android手机客户端

zqpyz6gx 发表于 2016-3-28 23:54:46

-。-没注意拍到烟了，开机的时候显示了3th mastor hard disk error。是连接线的问题吗。能够认盘。

eult6bh 发表于 2016-3-28 23:54:46

这个闪存应该不需要toggle跳线吧

7yywjl 发表于 2016-3-28 23:54:46

本帖最近评分记录：共3条评分，M币+16
剧毒M币 +3目测主控挂了加焊就好2014-09-28
千年之戀︶ㄣM币 +10歡迎探討2014-09-28
qas999M币 +3这个是intel 板子吧默认是toggle跳线？跳线改对了么？2014-09-28

数码之家22合一：性价比最高的S2拆机工具！告别CR-V，进阶级拆客必备！回复举报

离线qas999

http://haitao.8x6x.com:899/123/27782-certificate.gif

http://haitao.8x6x.com:899/123/15563-781593.jpg
UID：781593

http://haitao.8x6x.com:899/123/27787-mobile.gif
http://haitao.8x6x.com:899/123/17560-alipay.gif注册时间2009-12-10 最后登录2016-03-25 在线时间2809小时发帖1067 搜Ta的帖子精华0 M币576专家13 访问TA的空间加好友用道具
http://haitao.8x6x.com:899/123/15563-781593.jpg
数码3段
http://haitao.8x6x.com:899/123/25085-6.gif

http://haitao.8x6x.com:899/123/12544-shequjumin.png
http://haitao.8x6x.com:899/123/1367-rexinhuiyuan.png
http://haitao.8x6x.com:899/123/5148-youxiubanzhu.png

发帖1067M币576专家13粉丝187加关注发消息只看该作者 1楼发表于: 2014-09-28

这个是intel 板子吧默认是toggle跳线？跳线改对了么？

dwmqwj0 发表于 2016-3-28 23:54:46

跳线~写保护~都先确认下~在开卡~ 20多数是焊接的问题貌似~

36u845 发表于 2016-3-28 23:54:47

我只看到了那包中华。。。http://haitao.8x6x.com:899/123/14153-03.png
话说看起来是SATA连接故障。。。

内容来自Android手机客户端

2b8fmc 发表于 2016-3-28 23:54:47

跳线短接的2个点。

页: [1]

网云科技's Archiver

求救下，帮看看开卡的问题出在哪边。