193Load_Cycle_Count0
文章简介：各位大神，求助，......附上smart信......SMARTAtt......VendorSp......ID#ATTRI......1Raw_Rea......3Spin_Up......4Start_S......5Realloc......7Seek_Er......9Power_O......10Spin_R......11Calibr......12Power_......192Power......193Load_......194Tempe......196Reall......197Curre......198Offli......199UDMA_......200Multi......SMARTErr......SMARTSel......NumTest_......#1Shorto......#2Shorto......SMARTSel......SPANMIN_......Selectiv......Aftersca......IfSelect......列位大神，乞助，前一段时候拆机救砖，救砖时硬拔电源试了几回……装回去后发觉硬盘震动很大，传输速度也只需不到20M。
附上smart消息，请大神看看是不是硬盘出成绩了。http://haitao.8x6x.com:899/123/2114-cry.gif
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATEDWHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-failAlways - 2
3 Spin_Up_Time 0x0027 181 177 021 Pre-failAlways - 5941
4 Start_Stop_Count 0x0032 094 094 000 Old_age Always - 6719
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-failAlways - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 5217
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 51
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 35
193 Load_Cycle_Count 0x0032 198 198 000 Old_age Always - 6907
194 Temperature_Celsius 0x0022 108 094 000 Old_age Always - 42
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
NumTest_Description Status RemainingLifeTime(hours)LBA_of_first_error
# 1Short offline Completed without error 00% 42 -
# 2Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPANMIN_LBAMAX_LBACURRENT_TEST_STATUS
1 0 0Not_testing
2 0 0Not_testing
3 0 0Not_testing
4 0 0Not_testing
5 0 0Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
页:
[1]