LSI MegaRAID SAS 9260-8i / 9280 v12.12.0-0102 最新固件 (Merged) ~ 05/23/2012
此Merged版固件已將過往分開的非CacheCade版和可支持CacheCade Pro 2.0的二個獨立版本合併到現時的統一版本，即已不用再按功能來區分LSI 9260/9280的固件。This Firmware Support for CacheCade Pro 2.0 and non-CacheCade enabled controllers
~~~ !!! 注意 !!! ~~~ !!! 注意 !!! ~~~
本版為Merged版本，在升級Firmware後的第一次開機RAID卡需要約2分鐘時間進行更新程序，期間會停留在RAID卡的啟動畫面，此時千萬不能關機
~~~ !!! 注意 !!! ~~~ !!! 注意 !!! ~~~
************************************
LSI Corp. MegaRAID Firmware Release
************************************
Release date: 05/21/12
======================
Supported Controllers:
======================
MegaRAID SAS 9260-4i
MegaRAID SAS 9260CV-4i
MegaRAID SAS 9260-8i
MegaRAID SAS 9260CV-8i
MegaRAID SAS 9260DE-8i
MegaRAID SAS 9261-8i
MegaRAID SAS 9280-4i4e
MegaRAID SAS 9280-8e
MegaRAID SAS 9280DE-8e
MegaRAID SAS 9280-24i4e
MegaRAID SAS 9280-16i4e
MegaRAID SAS 9260-16i
******* This firmware supports Cachecade Pro 2.0 (if activated) for the controllers mentioned above.
******* This single firmware image can be used on all of the controllers mentioned above (no longer need separate image for the high-port-count controllers) .
Component:
=========
SAS MegaRAID Firmware Release for MegaRAID Controllers
Release date: 05/21/2012
Version Numbers:
===============
Current Firmware Package (with CacheCade Pro 2.0):12.12.0-0102 (Merged)
Current Package Details:
APP-2.130.293-1580_BB-2.02.00.00-0000_BIOS-3.24.00_4.12.05.00_0x05160000_HII-_WEBBIOS-6.0-48-e_44-Rel_PCLI-04.04-01900008_BOOT-09.250.01.219_NVDATA-2.09.03-0031_2012_03_22
Previous Firmware Package (with CacheCade Pro 2.0):12.12.0-0091
Previous Package Details:
APP-2.130.243-1483_BB-2.02.00.00-0000_BIOS-3.24.00_4.12.05.00_0x05120000_WEBBIOS-6.0-42-e_37-Rel_PCLI-04.04-01900008_BOOT-09.250.01.219_NVDATA-2.09.03-0029_SAS2XFW-25.05.04.00_MFGIMG-25.05.04.00_2012_01_07
Bug Fixes and Enhancements:
===========================
Firmware:
=========
LSIP200223753 (DFCT) (CL LSIP200221295) Reboot Causes HSP to Revert to Unconfigured Good
LSIP200222937 (DFCT) (CL LSIP200210145) Adding/Removing FoD key causes Legacy BIOS to stop and not continue
LSIP200222809 (DFCT) Amber LED flashes during copyback after rebuilding degraded VD
LSIP200223758 (DFCT) Falcon FW - 1509/recon starting and progressing in 1.21 HII
LSIP200223351 (DFCT) (CL LSIP200223304) R5/R6 enabled using FOD and do a OCR on controller;R5 VD comes up as foreign once OCR is done
LSIP200229774 (DFCT) 10M09 Liberator: Querying SMART / PFA Status Returns All Zeros in Sense Data
LSIP200225195 (DFCT) Clearing excess drive error
LSIP200230774 (DFCT) FW fails to create configuration and utilites fail to report the VD size after the reconstruction.
LSIP200222944 (DFCT) HDD powersave options still shown in Ctrl Info,VD info & VD creation menus of HII becase FW reports it supports PS
LSIP200187938 (DFCT) SATA FDE disk not recognized as FDE, SAS model is
LSIP200223120 (DFCT) Secured Drives Counts as Two Physical Drives
LSIP200230641 (DFCT) Megamon during import of FC from MR to iMR contoller
LSIP200210843 (DFCT) Battery is < 623mAH and LUNS in writeback mode
LSIP200229432 (DFCT) Port LSIP200211420 to Liberator - Upon OCR, Recon Ghost LD needs to be created before WJ processing
LSIP200223461 (DFCT) (CL LSIP200223341) If you enable security on controller using FOD and create secure VD it goes missing upon reboot.
LSIP200221295 (DFCT) Reboot Causes HSP to Revert to Unconfigured Good
LSIP200222969 (DFCT) (RW LSIP200222956) (CL LSIP200222934) After OCR+reboot, user is asked to hit enter to ack the activated FOD features on
LSIP200199420 (DFCT) 'clear' tasks on disks always show 0% complete when doing 'init' task on RAID volume
LSIP200222391 (DFCT) BBU Charging gets disabled when Transparent Relearn fails to start due to low capacity
LSIP200223703 (DFCT) HWR: 10M09: PD other error counter never increments
LSIP200229673 (DFCT) Fix compilation issue
LSIP200230643 (DFCT) Error message pop out in HII when set to factory default.
LSIP200222594 (DFCT) Windows blue screen while in background rebuild process
LSIP200222918 (DFCT) cannot auto rebuild while we put a clean - JBOD
LSIP200222956 (DFCT) (CL LSIP200222934) After OCR+reboot, user is asked to hit enter to ack the activated FOD features on OEM system.
LSIP200210345 (CO) (auto4comp FW_SAS_LSI) Read Locate LED state via BMC
LSIP200229612 (CO) (auto4comp FW_SAS_LSI) Change EDV values in iBBU07 to improve accuracy with aging batery packs
LSIP200151207 (CR) Read Locate LED state via BMC
LSIP200224034 (CR) Change EDV values in iBBU07 to improve accuracy with aging batery packs
WebBIOS:
========
LSIP200223149 (DFCT) HII/HII browser sluggishness is seen when exiting browser, going to EFI WebBIOS, and then going back to HII browser
LSIP200223217 (DFCT) IMR-Web Bios shown Configured drives option in Manage power save settings
LSIP200230109 (DFCT) Grammatical error in WebBIOS.
LSIP200224127 (DFCT) In WebBIOS, Drive Group Definition screen, enclosures should not be selectable in the Drives column
LSIP200230031 (DFCT) In EFI-WebBIOS (ver: 4.0-e_45-Rel), the white bars do not match up under VD properties page.
BIOS:
========
Numerous UEFI and HII updates
NVDATA:
=======
Numerous NVDATA changes
Installation:
=============
Use MegaCLI to flash the SAS controllers.MegaCLI can be downloaded from the support and download
section of www.lsi.com
Command syntax:MegaCli -adpfwflash -f mr2108fw.rom -a0
Download:
http://www.lsi.com/downloads/Public/MegaRAID%20Common%20Files/MERGED_12.12.0-0102_SAS_2108_FW_Image_2.120.293-1580.zip
官方规格是这么写的，不过以前X58、P55曾经出现过华硕的民用主板在装上了ECC内存条后，BIOS里有ECC选项的案例，至于ECC是否真的生效了也不从得知。
能找到ASUS或Gigabyte的主板作測試嗎？
目前在用的LSI 9260-8i配RHEL和Ubuntu使用正常。
*/-91其实就算ecc+206+xeon，也死过机啦。。。。。。。
若更新固件後在Windows下一切正常，即兼容性問題應該解決了，那唯有升級Linux版本或套件，或等LSI更新Linux驅動。
有試過把LSI 9240安裝到其他主板運行同樣的linux可以正常使用嗎?亦可嘗試email LSI Support看看是否有新的測試版linux driver可供測試。
pcinlife 上的raid卡巨头之一来普及LSI知识来了。。。。。。。
有沒有安裝LSI的管理軟件MSM?
h77,z77好像没发开启，只有c206和c216或者2xx系列可以
这个卡是否支持Raid 0+1?
LSI 9240的BIOS設計與9260的極為相似，很大機會也不能兼容S1200KP。
你現在的9240與S1200KP的狀況如何？ 是完全找不到LSI 9240還是不能通過BIOS POST畫面？
有試過在S1200KP的BIOS中把SATA模式設為IDE嗎？
页:
[1]
2